8 Foot / 2.6 Meter Alumilite Aluminum Prism Pole – 10ths and Metric

SECO PN: 90276

This 8-foot (2.6 meter) 1-1/4-inch OD aluminum Crain Alumilite® pole features a 42 ARC-minute level vial.

The inner pole is dual-graduated in 10ths and metric.

All Crain prism poles have a standard prism offset of 0.500ft (152.5mm). The adjustable 5/8 x 11 adapter may be preset within a 0.27ft (82.55mm) range to accommodate a broad range of prism heights.

Standard features on all Crain prism poles:

Topo-Boot® - Exclusive on Crain’s poles, the Topo-Boot (standard) screws over the precision point and increases the area of the point for the use on soft surfaces in topo shots. The Topo-Boot is removable and stores conveniently under the large, easy to read level vial when not in use.

Grip-Tite® Locking System - The Grip-Tite locking system eliminates elevation errors due to malfunctioning locks. High-strength elastomeric pads grip the telescopic sections and can be adjusted with an allen wrench (included).

Stedi-Rest® - Crain’s multi-functional Stedi-Rest, on all Crain poles, can actually take the place of three separate products. The Stedi-Rest can act as an equipment “prop” to keep your equipment out of mud or water. It can be used to check the calibration and recalibrate your pole’s level vial. Another use is to attach the Stedi-Rest to a tripod for a pole support system.

Weighs 3.05 lb

12 Foot / 3.5 Meter Alumilite Aluminum Prism Pole with 10 ARC second vial – 10ths and Metric

SECO PN: 90287-10ARC
This 12-foot (3.5 meter) 1-1/4-inch OD aluminum Crain Alumilite® pole features a 10 ARC-minute level vial.

The inner pole is dual graduated 10ths and metric.

All Crain prism poles have a standard prism offset of 0.500ft (152.5mm). The adjustable 5/8 x 11 adapter may be preset within a 0.27ft (82.55mm) range to accommodate a broad range of prism heights.

Standard features on all Crain prism poles:

Topo-Boot® - Exclusive on Crain’s poles, the Topo-Boot (standard) screws over the precision point and increases the area of the point for the use on soft surfaces in topo shots. The Topo-Boot is removable and stores conveniently under the large, easy to read level vial when not in use.

Grip-Tite® Locking System - The Grip-Tite locking system eliminates elevation errors due to malfunctioning locks. High-strength elastomeric pads grip the telescopic sections and can be adjusted with an allen wrench (included).
Stedi-Rest® - Crain’s multi-functional Stedi-Rest, on all Crain poles, can actually take the place of three separate products. The Stedi-Rest can act as an equipment “prop” to keep your equipment out of mud or water. It can be used to check the calibration and recalibrate your pole’s level vial. Another use is to attach the Stedi-Rest to a tripod for a pole support system.

Weighs 3.05 lb

C621-0

15 Foot / 4.7 Meter Alumilite Aluminum Prism Pole – 10ths and Metric

SECO PN: 90201

This 15-foot (3.5 meter) 1-1/4-inch OD aluminum Crain Alumilite® pole features a 42 ARC-minute level vial.

The inner pole is dual graduated 10ths and metric.

All Crain prism poles have a standard prism offset of 0.500ft (152.5mm). The adjustable 5/8 x 11 adapter may be preset within a 0.27ft (82.55mm) range to accommodate a broad range of prism heights.

Standard features on all Crain prism poles:

Topo-Boot® - Exclusive on Crain’s poles, the Topo-Boot (standard) screws over the precision point and increases the area of the point for the use on soft surfaces in topo Shots. The Topo-Boot is removable and stores conveniently under the large, easy to read level vial when not in use.

Grip-Tite® Locking System - The Grip-Tite locking system eliminates elevation errors due to malfunctioning locks. High-strength elastomeric pads grip the telescopic sections and can be adjusted with an allen wrench (included).

Stedi-Rest® - Crain’s multi-functional Stedi-Rest, on all Crain poles, can actually take the place of three separate products. The Stedi-Rest can act as an equipment “prop” to keep your equipment out of mud or water. It can be used to check the calibration and recalibrate your pole’s level vial. Another use is to attach the Stedi-Rest to a tripod for a pole support system.

Weighs 3.75 lb

C051-0