Ring Terminals MSRP is $35.00 p/n
Required Receiver Cable
Receiver Cable Extension, coil
p/n ATI010975 (optional)
marked optional are needed for the Deluxe Package only!
Standard Package: $1,450.00
RD15 Remote Display lets the operator view
grade information at a convenient location in the cab or from
the operator's seat. An LED array displays grade information and
tilt / plumb information if available on the receiver (BULLSEYE
5+ and BULLSEYE 6). The RD15 allows a tilt display to be visible
on the BULLSEYE 6 receiver not visible when using "stand alone."
The RD15 also allows a temporary offset elevation to be set.
The RD15 works with all current models of
BULLSEYES and most prior versions. An installation kit
containing magnets, mating Velcro strips, double-sided tape and
a rubber strap is included. A swivel mount is an optional
The RD15 requires a receiver cable to
connect to the receiver. A straight cable or a coil cord, each
with optional extensions, is available. The receiver cable
provides power from the BULLSEYE batteries. Optional machine
power cables are available.