|
'Attention
Ball Field Contractors'
Professional
Grade Cone Laser
|
|



From Laying Out Sports Fields
to Machine Control
|
|
L6c
Literature
|
|
Specifications:
-
Laser Classification: Visible Red Diode
(Class IIIa, IEC Class 3R)
-
Automatic Leveling Range: ±
4 degrees
-
Accuracy: 3/32" at 100 ft.
-
Operating Range: 1,000'
diameter
-
Rotation
Speed: 0 - 500 rpm
-
Power Source: 2 D Alkaline or
NiMH
-
Battery Life: Alkaline 60 Hours
/ NiMH 40 hours
-
Low
Battery Indicator: Displays Flashing Red Light when
Approx. 10 hrs. of life left (alkaline)
-
Re-chargeable Batteries: Optional Kit Available
-
Cone Grade Range: ± 3.5%
-
Automatic Shut-off: If off
level > 5 minutes
-
Weight: 5 lbs.
-
Warranty: 24 months defect
coverage
|

|
|
The Pro Shot L6c can be set for positive
and negative cones
Works well with most automatic laser
systems
'Allows
for one time set up when grading baseball & softball fields' |
|
$2995.00
10%
Off Sale:
$2,695.50
|

R7 Receiver, Rod Clamp, & Carrying Case are also Included
with the L6c Laser
The R7 Electronic Laser
Receiver combines an affordable price with the features
of high end, high
cost laser receivers. It works with all Pro Shot laser
transmitters, and most other brands of rotating lasers
on the market. Grade information is conveyed via a LCD
front panel display, a LED display on its backside, and
audio tones. The visual display now provides 5 channels
of information, high, high fine, on grade, low fine, and
low. The user can select between three operating
accuracies, ultra-fine (±1/64 inch), standard (±1/16
inch), and coarse (±1/8 inch). The R7 provides between
500 and 1000 feet (152m to 305m) of working range
depending upon which Pro Shot transmitter it is paired
with. The receiver runs for approximately 60 hours on a
9V alkaline battery. 3 year Guardian Warranty. |
|
'Setting the Slope'
This laser has been calibrated to enable
the user to quickly set it for level
work. Simply rotate the Cone Indicator Dial to the center
'0'.
The Cone Indicator Dial designates the approximate
position for the percent of grade
desire.
Example:
To get 1% of grade, 1 foot of fall per
100', move the Cone Indicator Dial to the '1.0'
mark as shown above. Next using the R7 Receiver, check to
make sure the slope matches the desired
slope. Adjust as necessary and re-check
slope.
The maximum grade is
± 3.5%
and
can be achieved by rotating the
Cone Indicator Dial. |


Inverted Cones for Track and Field - No Problem
"NOT
JUST ANOTHER LASER"
THE ONE AND ONLY PROVEN
'CONE
LASER'
(573)
624-8988

Don Foster, Sales Mgr.
- Talk to a person, not a machine
Laser Grade Company - 13755 St. Hwy. F @ Jct. 60 - Dexter, Missouri 63841

Laser Grade
is a Federal & State trademark registered by Laser Grade Co.
since 1981

FIND A LOWER
PRICE?
GIVE US A
CHANCE TO MEET IT OR BEAT IT !
|
|
|